Mackie 16-8 BUS Hook-up Manual

※ Download: Mackie d8b hookup

Easier to see and use. Mix-B is where your tape returns show up during...

The discussion of levels is a little shaky and some other discussions are less than totally adequate. Auxes 9-12 are sent to analog outputs and to the headphone sections. Very handy, with impressive and welcome redundancy. A mute button shuts down the channel just before the pan-pot.

Mackie D8B Service Notes Small - Line-In From Mixer Board Step Shut down the Mac computer and the mixer board. These examples assume that the rest of your studio equipment monitors, sound sources, outboard processing, etc.

Apple's GarageBand and other Mac recording applications make it relatively easy for artists and music enthusiasts to create professional-quality recordings and discs without investing tens of thousands of dollars in equipment. Although digital mixers included with the software recording applications do a reasonably good job of mixing sound levels for a few channels, they still do not compare with sound levels achieved with stand-alone mixing boards. Fortunately, a couple of options allow you to connect your Mac to a mixer. Video of the Day Connect your Mac to a mixer board and create a recording studio. Line-Out to Mixer Connections Step Connect the mixer board to other instruments, microphones or sources you want to use in the recoding. Connect the power source to the mixer. Connect the amplifier and speakers to the mixer board as well. Step Connect the small end of the 3. On many Macs, the line-out port has a green ring around it and might be the connection used for your computer speakers if you are using a desktop computer. Other Macs have a headphone or audio-wave symbol next to the port to differentiate it from line-in or microphone ports. Disconnect the speakers from your computer if the port is already in use. Step Open an audio or music player application on the Mac. Line-In From Mixer Board Step Shut down the Mac computer and the mixer board. In most cases, the line-in port should have a blue ring around it. Step Power on the mixer board, then your Mac. After the Mac boots, open an audio-recording or audio-mixing application. Power on the source device connected to the mixer board. You should be able to hear the music over your Mac speakers. Step Use the dials or sliders on the mixer board to adjust the levels of the source music. You can hear changes you make on the mixer board over the Mac speakers.

Professor TMM helping Jay Plat with D8B pt. 2
We know it may look boring, but one of these drawings could save your life. Set the D8B Sample Rate to 44. You do not have to print the entire manual Mackie D8B but the selected pages only. Step Connect the small end of the 3. Stepping between functions is quick and easy and the controls fall nicely to hand. Apple's GarageBand and other Mac recording applications make it relatively easy for artists and music enthusiasts to create professional-quality recordings and discs without investing tens of thousands of dollars in equipment. You can select which input you want, and which output. Also included in the Master section are the Assignment group of switches, automation controls, and set-up and housekeeping controls, plus a clipboard management section, some Stereo Bus editing controls and some shortcut Keys. Then, route the signals back to the Tape Returns for mixdown. To start viewing the user manual Mackie D8B on full screen, use the button Fullscreen.